We are one amidst the dependable Industrial Honing Machine Exporters from India. Various national as well as international clients are placing bulk orders for the Honing Machine as this provides a wide range of stroking rate ranging from 80 to 310 strokes / min. The Honing Machines work with the power required up to 2500 RPM. In addition to this, the applications of the Vertical Honing Machine are as listed below:
- Bores from 2.0 ø to 165 ø can be manually sized.
- Bores from 3 mm ø to 51 mm ø can be auto-sized and power stroked.
- The bores can be honed square with the locating face, using special set-up.
- Work pieces with length up to 250 mm can be power stroked or manually stroked.
- Auto-sizing and stop is achieved by a sensing tip and self energized stroking.
- Mechanical sizing is achieved by crank and linkage mechanism.
It completely eliminates the tiring job of manual stroking. It is a controlled operation. Feed rates, stroke length, stroke speed can be set and locked. Power stroking assures constant stroke length, stroke rate, and stone feed for high production rates.
After setting the diameter of sensing tip (the plug) to about 5 to 8 microns smaller than the finish diameter of the bore being honed, the sensing tip is prepositioned so that it will enter a “ to size” bore as the workpieces moves back through its last 3mm increment of stroke.
As long as the bore is undersize the sensing tip will be depressed at the back end of each stroke and the stroking circuit will be energized for one more stroke. As soon as enough stock is removed the sensing tip slips in to the bore. The stroking circuit is de-energized and the honing cycle stops automatically. The bore is “to size” and the machine is ready for next cycle.
Fixturing and Tooling
The fixtures can be easily & quickly installed to the stroking arm at the machine. It accommodates variety of jobs with different sizes, shape & length. Fast & Easy to loading work on a wide variety of components, especially useful on thin valves, small parts with smooth surfaces & pieces with sharp projections handle rests on bar of machine to absorb honing torque.
Wide variety of honing units available as per job, size, length & type. Honing units are provided with quick change adaptors to facilitate easy mounting on the machine.
- Type : Horizontal
- Stroking : Power and Manual
- I.D. Range : For Power stroking 2mm Ø to 95mm Ø. For manual stroking 2mm ø to 165mm ø
- Length : Open end bores upto 250mm long can be automatically sized. Open or blind bores upto 250mm long can be power or manually stroked.
- Stroking Rate : 80,100,160,220,310 strokes/min.
- Spindle Speeds : 200,250,320,400,500,640,800, 1000,1270,1600,2000,2500 RPM
- Spindle Motor : 1HP
- Stroke Motor : ½ HP
- Filter System : Self contained
- Floor Area : 1300mm x 1850mm
- Weight : 450 kg.Net.
- Job Holding Fixture
- Work Trays
- Diamond Dresser
- Spanner set